How to Flash Asus ZenFone 5Z Firmware via SD Card and PC

I was doing web development at the time and needed to access webservers on my lan by their FQDN. Buffalo’s firmware did not support NAT loopback, but the DD-WRT rebrand did. Since then, the networking vendor has also released a new family of modern purpose-built mesh systems called ZenWiFi with a different naming convention from their standalone routers. Almost all Asus routers feature a VPN section with support for just standard VPN servers but also Instant Guard, a new feature added in mid-2021 for mobile users. But before we dive into that, let’s check out the real-world performance of all Asus routers and purpose-built mesh systems I’ve tested. Most, if not all, Asus Wi-Fi routers, standing with its Wi-Fi 5 models, use the same Linux-based open-source firmware called Asuswrt. Consequently, they all share what I call the core features.

Now put two and two (more like 1, 2, and 3 in this case) together, and you can figure out what each model name means. Let’s do a bit of dissecting to see what these three parts mean.

• Also required is an official Android app for Windows, OS X, and Linux called ‘adb’, which stands for Android Debug Bridge.
• It allows users to update their phones without losing data.
• Or, if you have installed TWRP recovery, you could use it to flash the official full firmware ZIP provided by Asus.
• Also, if we hibernate and eliminate a lot of unwanted apps and optimize some apps, your device is hardware limited.
• In short, there’s no risk in using Merlin if you don’t mess up the firmware migration process or expect tech support from Asus.
• So backup all personal data like photos, contacts, and apps, etc to prevent data loss.

In my case, it’s the “Merlin” folder on the desktop, as mentioned above. Alternatively, you can click on the firmware version at the top of the interface’s webpage to jump to the update section. Now you’re ready to perform the firmware migration in the next step. In other words, Merlin is based on the stock firmware and, therefore, always becomes available, if at all, (long) after the release of a router. Upon rebooting, log in to your device again and check that the latest firmware version has been successfully installed. After the firmware update is completed, press the On/Off button on your device to reboot it manually. To be sure if you are successfully connected please visit strongvpn.com and check your IP address at the top of the page.

For example, my newer ASUS router mesh system is not supported, but that’s OK for now, as I don’t expect to need more than the router offers very soon. This tutorial also can be used for users who wish to manually install Merlin Firmware on Asus RT AC86u. Some open-source alternative router firmware projects allow you to just do a manual update using the original firmware file.

• They tend to be completely different from the stock firmware and, therefore, quite hard to handle.
• It will also help you with IMEI Issues or Dead Issues.
• It’s done with the installing of the TWRP recovery on Zenfone Max Pro M1, and now you can go ahead as well as flash the stock firmware AOSP Android 10 on Zenfone Max Pro M1.
• But make sure that the firmware is fit for your device else it can get bricked.
• We have mentioned full step-by-step instructions on how to install AOSP Android 10 on Asus ZenFone Max Pro M1.
• At this point, Paranoid Android has added support for a long list of smartphones including Xiaomi, OnePlus, realme, Nothing, Google, and more.

Here you can Download and install Asus ZenFone Max Pro M1 Android mobile device USB (Universal Serial Bus) drivers for free. We provide official links of original equipment manufacturers sites to download drivers. This process erases all data like photos, contacts, and apps, etc on your Android phone. In the above three methods, we only do reset but in this, we are going to replace the entire android system. If you buy a Asus Zenfone Max Pro (M1) Device, then it has a Stock ROM.